ESC VESC® BLDC Open-Source Electric Skateboard ESC (Fully Assembled)

This is the fully assembled VESC® controller board.

TIAO ESC is fully compatible with VESC® Software. TIAO ESC is based upon the VESC® Open Source Project.

Specification

• v4.12 Hardware (Latest hardware version)
• Latest v2.18 for Firmware for FOC (Latest firmware version)
• 10awg motor wires w/ 5.5mm bullet connectors.
• Bootloader and Firmware Loaded. With Motor Detection & FOC Tested.
• Strong, Reliable and Progressive Electric Brakes.
• Start from a stop with Unsensored or Sensorless Motors as if it was Sensored.
• Many Safety Features such as Current Control and Temperature Control Features.
• Sensored and Unsensored (FOC) Field Oriented Control allows your electric skateboard to run with barely any motor noise.
• Built in 5V BEC (Used to power your receiver.)
• Voltage: 8V to 60V (Up to 14S LiPo Voltage)
• Current: Up to 240A for a few seconds or 50A continous
• PCB size is 40mm x 60mm
• Regenerative Braking
• Sensored or Sensorless operation
• Great start-up torque with sensorless motors
• VESC complete size is 120mm long, 40mm wide.

Github Repository

Discussion forum