All In One JTAG Cable for FTA

This is a JTAG cable made for bringing your Free To Air receivers back to life.

Use this JTAG cable to fix green light syndrome (GLS) at home.

This is the 2nd generation of the JTAG cable manufactured by TIAO Corp.

TIAO has a long history of making JTAG cables. They make the world's best JTAG cables. The first generation JTAG cables have resistors directly soldered on the wires (year 2004/2005). The 2nd generation of JTAG cables (starting from year 2007) uses Printed Circuit Board inside DB25 shell. All SMD resistors are soldered on a small PCB. It is proved to be much more reliable than the first generation of JTAG cables.

TIAO is the only manufacture uses PCB for JTAG cables. Other vendors or homemade JTAG cables still use 1st generation technology, soldering resistors on wires directly. TIAO's JTAG cable also comes with solderless adapter, which means you can fix your FTA receivers without soldering anything. TIAO is the only manufacture makes solderless JTAG cables. This is the only cable you will ever need to repair your FTA receiver. This cable will correct any problems you are having with your receiver quickly. This JTAG includes a 40 pin header so you can break it to 20 pin or 10 pin. It works with any receivers with the 10, 20 pin slot or 12 pin slot. Five 100 ohm resistors are presoldered on the PCB inside. The cable has a 20 hole female IDC header and a 10 hole female IDC header. Therefore it can be directly plugged into a 10 pin, 20 pin and 12 pin header on your receiver.

This package contains:

• All in one JTAG cable for FTA receivers (10 pin and 20 pin) 
• 40 Pin male header (easily break to 10 pin o 20 pin) 
• Solderless adapter

This FTA JTAG cable can fix all FTA receivers including the: PANSAT 2300, PANSAT 2500A, PANSAT 2700A, PANSAT 3500S/3500SD, ARIZA, Fortec Lifetime, Lifetime Ultra, Coolsat, Digiwave, stealth 2000A's, Blackbird, Silver Bullet, , Megasat, Emetabox, all other models of FTA receivers that have a 20, 12 pin jtag port. Pantec, Multistar, Clones, Pansat 3000 and all other models that have a have a 10 pin jtag port. Note: This cable will work for routers and cable modems with our zJTAG software.